Heat Conductive Silicone Cap

Silicone-based thermal grease with 2–10 W/m·K thermal conductivity, low thermal resistance and high electrical insulation (volume resistivity 10^14 Ω·cm). Operating range −40 to 250 °C. Fills the gap between chips, power components and heat sinks. Available in several conductivity grades and package sizes; samples on request.

Heat Conductive Silicone Cap: High-Efficiency Heat Transfer and Insulation for Precision Components

In modern electronics, the heat conductive silicone cap is a key accessory for securing the electrical safety and thermal stability of power components such as TO-220 packaged devices. The thermally conductive silicone caps from Lixing Composite Materials combine excellent thermal conductivity with high-voltage insulation, effectively lowering component operating temperatures and significantly extending the service life of electronic equipment.

Why Choose Lixing Heat Conductive Caps?

  • Efficient thermal management: Thermal conductivity of 0.8~1.0 W/m·K rapidly transfers component heat to the heat sink and prevents heat build-up and overheating.

  • High-voltage and high-temperature tolerance: Withstand voltage above 4kV and stable long-term operation from -40°C to +180°C keep precision circuits safe.

  • Excellent insulation: A high-quality silicone base provides outstanding electrical insulation, preventing short circuits or dielectric breakdown between components and protecting equipment operation.

  • Flame-retardant and environmental certification: Rated UL 94 V-0/V-1 for flame retardancy, and the full series is RoHS certified, meeting green procurement requirements for global electronics manufacturing.

  • Complete range of standard sizes: Available in a variety of standard package sizes including TO-220A/B/C and TP-3PA/B, for easy installation and a close fit to the component.

Physical Properties

Property Unit Typical Value Test Method
Color — Gray Visual
Specific Gravity / Density — 1.7 ~ 1.8 ASTM D792
Hardness Shore A 70 ± 5 ASTM D2240
Operating Temperature °C -40 ~ +180 GB/T 3512-2014
Withstand Voltage kV > 4 ASTM D149
Tensile Strength Kgf/cm² > 20 ASTM D412
Elongation % > 160 ASTM D412
Thermal Conductivity W/m·K 0.8 ~ 1.0 ASTM D5470
Flame Rating — V-0 / V-1 UL-94

Applications and Specifications

  • Applications: Widely used on diodes, transistors, electronic sensing components and electrical parts, providing heat dissipation, insulation and physical protection for all kinds of power components.

  • Standard specifications:

    • TO-220 series: TO-220A, TO-220B, TO-220C

    • TP-3P series: TP-3PA, TP-3PB

  • Custom service: Precision customization of size, color or physical parameters is available for special package structures or special application requirements.


Heat Conductive Silicone Cap at a Glance

To summarize, the heat conductive silicone cap meets two needs of power components such as TO-220 packaged devices at once: electrical safety and thermal stability. Lixing’s silicone caps pair strong thermal conductivity with high-voltage insulation, so components run cooler and electronic equipment lasts longer.

[Key Advantages]

  • Thermal management: Thermal conductivity of 0.8-1.0 W/m·K moves heat from the component into the heat sink and prevents thermal accumulation.

  • Voltage and temperature tolerance: Dielectric strength above 4kV, with stable performance from -40°C to +180°C for overall device safety.

  • Insulation: The high-grade silicone base prevents short circuits and dielectric breakdown between components.

  • Flame retardancy and compliance: Rated UL 94 V-0/V-1 and fully RoHS certified for green procurement in electronics manufacturing.

  • Standard sizes: TO-220A/B/C and TP-3PA/B, easy to install with high conformability.

[Physical Properties]

Property Unit Test Value Test Method
Color — Gray Visual
Specific Gravity — 1.7 ~ 1.8 ASTM D792
Hardness Shore A 70 ± 5 ASTM D2240
Operating Temp. °C -40 ~ +180 GB/T 3512-2014
Withstand Voltage kV > 4 ASTM D149
Tensile Strength Kgf/cm² > 20 ASTM D412
Elongation % > 160 ASTM D412
Thermal Conductivity W/m·K 0.8 ~ 1.0 ASTM D5470
Flame Resistance — V-0 / V-1 UL-94

[Applications & Specifications]

  • Applications: Diodes, transistors and other electronic and electrical components that need heat dissipation, insulation and physical protection.

  • Standard Specifications:

    • TO-220 Series: TO-220A, TO-220B, TO-220C

    • TP-3P Series: TP-3PA, TP-3PB

  • Customization Service: Sizes, colors and physical parameters can be tailored precisely to unique package structures or specific application requirements.

Product video

TO220A

長12.5mm, 寬11.5mm, 高5.9mm, 厚0.5Tmm

TO220B

長16mm, 寬11.5mm, 高5.9mm, 厚0.5Tmm

TO220C

長21.8mm, 寬12.1mm, 高5.9mm, 厚0.5Tmm

TO3PA

長28.5mm, 寬17.5mm, 高5.9mm, 厚0.5Tmm

TO3PB

長28.8mm, 寬18.2mm, 高6.6mm, 厚0.8Tmm

LINE