Use bend radius and outer-fiber strain to plan conductive silicone tubing routes while checking 10^6–10^10 Ω resistance, 70 ± 5 Shore A hardness, and installation space.
Author Archives: lixingdotcom
18
Oct
Oct
See how crepe-paper conformability, holding power, and controlled peel conditions support stable industrial masking and cleaner removal.
FPC Lamination Materials, Latest News
A Better Fit for FPC Quick Presses: Silicone Steel Pad Compatibility and Uniform Heating
17
Oct
Oct
Assess quick-press compatibility through machine fit, platen contact, and heat-flow conditions using verified silicone steel pad data.
17
Oct
Oct
Use the listed ≤0.01% oil separation, volatile content and dispensing conditions to plan traceable thermal-interface sampling.
17
Oct
Oct
H-TT-AL combines a thin silver aluminum-foil tape format with thermal-interface and local EMI-boundary design options for compact electronics.
FPC Lamination Materials, Latest News
FPC Red Silicone Pad for Hot Press Lamination: 50 HA Cushion for Even Pressure
16
Oct
Oct
For FPC hot press lamination over uneven traces and coverlay, the red silicone pad pairs a 50 HA silicone cushion with one 0.2 mm fiberglass layer, rated up to 250°C with about 5,000 cycles of service life (varies with conditions).
Latest News, Thermal Conductive Materials
Fiberglass Thermal Tape with 5 kV Withstand Voltage: Thin 0.095 mm Insulation That Still Moves Heat
16
Oct
Oct
H-GT-WH fiberglass thermal conductive tape is 0.095 mm thick in total and lists a 5 kV withstand voltage and 0.35 W/(m·K) thermal conductivity for insulating power and LED modules from their heat sinks.
Latest News, Thermal Conductive Materials
Thermal Pad Heat Path Design: Cooling Power Supplies and PCBs Through the Chassis
15
Oct
Oct
A silicone thermal Thermal Pad turns air gaps between components and the metal chassis into a continuous heat path: 1.0-10.0 W/m·K grades, 5-40 Shore B softness, and a series-resistance check to find the bottleneck.
Conductive Materials, Latest News
Conductive Foam for Uneven Enclosure Gaps: The Right Thickness Evens Out Contact Pressure
15
Oct
Oct
When gap variation is a small fraction of foam thickness, contact pressure along the seam stays closer. Four verified benefits of LXD conductive foam for mechanical gap filling, plus the stress–strain relation behind thickness selection.
Latest News, Thermal Conductive Materials
Non-Flowing Thermal Grease: Dispense Smoothly, Stay at the Interface
14
Oct
Oct
See how grey, high-viscosity thermal grease can balance dispensing with interface retention, using a yield-stress model without turning theory into a product guarantee.