The H-GF-GY thermally conductive silicone encapsulant bonds without primer, can be pried open after cure for repair, and offers 1.0–3.0 W/m·K with UL 94 V-0. Four practical benefits and what to prepare before sampling.
Author Archives: lixingdotcom
12
Oct
Oct
See how LXFP-256 combines a published UL 94 V-0 material rating with die-cut sealing and cushioning options, while keeping material classification separate from end-product fire compliance.
12
Oct
Oct
Use compression-set evidence to assess an FFKM O-ring for high-temperature static sealing, with clear ASTM D395 comparison limits.
12
Oct
Oct
A thin, die-cuttable copper-based tape can extend local shielding paths while keeping grounding, seams, and frequency limits visible in the design.
11
Oct
Oct
G-TT-GY combines a soft, compressible silicone tube wall with one annular fiberglass reinforcement layer for thermal contact, electrical insulation, and dimensional support under modest assembly pressure.
10
Oct
Oct
Connect ESD dissipation, flexible routing, and homogeneous-material RoHS documentation in one conductive silicone tubing decision.
Conductive Materials, Latest News
Soft-Conforming Antistatic Silicone Pads for Cushioning and Conductive Contact in Precision Assembly
10
Oct
Oct
A verified 30 Shore A hardness and 3.0 mm thickness make this black antistatic silicone pad suitable where conforming contact, cushioning, and a conductive path are needed together.
09
Oct
Oct
Verify grade, specimen thickness, conditioning, vertical test method, and report scope before selecting silicone foam tubing for a seal.
Latest News, Silicone Tubing
Custom Shaped Silicone Tubing Across Temperature: What Belongs on the Drawing?
09
Oct
Oct
A room-temperature profile alone does not define a shaped silicone tube for thermal cycling. Review datum temperature, mating geometry, length allowance, restraint, and validation conditions.
Latest News, Thermal Conductive Materials
How Should Engineers Compare UL 94 and D5470 Data for a TO-220 Silicone Cap?
08
Oct
Oct
A practical checklist for separating UL 94 specimen conditions from ASTM D5470 thermal test conditions before selecting a TO-220 heat-conductive silicone cap.