Designed for dynamic robotic routing, Lixing Conductive Silicone Tube combines 70 Shore A hardness, tensile strength ≥ 5 MPa, and 170% elongation at break with stable 2.5 to 6 Ω·cm volume resistivity for reliable ESD grounding.
Author Archives: lixingdotcom
Latest News, Thermal Conductive Materials
Thermal Pad Selection for Low-Pressure Assembly: Gap, Hardness and Contact Resistance
01
Oct
Oct
How to select a thermal Thermal Pad when clamping force is limited: the ASTM D5470 impedance model explains why low-pressure conformability dominates contact resistance, plus a gap-hardness-thickness checklist.
FPC Lamination Materials, Latest News
FPC Green Silicone Pad “Anti-Static, Insulating”: Three Checks Before Selection
30
Sep
Sep
When an FPC green silicone pad is described as anti-static and insulating without measured values, selection should start with three checks: standard-method surface resistance or withstand-voltage data, press contact and grounding paths, and property tracking after thermal cycles.
Latest News, Thermal Conductive Materials
How to Read Aluminum Thermal Tape Withstand Voltage: Separate the Conductive Foil from the Insulation Path
29
Sep
Sep
Before selecting H-TT-AL, verify working voltage, test conditions and the actual insulation path instead of treating aluminum heat spreading as assembly insulation.
29
Sep
Sep
Review custom-shaped silicone tubing by mating interface, minimum wall, tolerance datum, and noncircular passage, with hydraulic-diameter limits explained.
Latest News, Thermal Conductive Materials
TO-220 Heat Conductive Silicone Caps: Fourier-Law Guidance for Thermal Paths
28
Sep
Sep
Use Fourier’s law to examine the thermal path from a TO-220 power device through a silicone cap to a heatsink, with insulation and package-fit checkpoints.
FPC Lamination Materials, Latest News
Managing Local Heat Concentration in FPC Lamination with an Aluminum Foil Silicone Sheet
28
Sep
Sep
Use Fourier’s law to examine uniform heat transfer in FPC hot pressing and review contact, cushioning, and selection considerations for an aluminum foil silicone sheet.
FPC Lamination Materials, Latest News
FPC Lamination Buffering: Reading a Green Silicone Pad Through Average Stress
28
Sep
Sep
Use sigma = F / A as a nominal stress model to organize interface contact, cushioning and selection checks for FPC hot-press lamination.
28
Sep
Sep
A practical look at composite structure, interface fit, and the limits of E = V / d when reviewing insulation around an FPC hot-press stack.
26
Sep
Sep
Use Fourier’s law, tube-wall geometry, and contact interfaces to frame heat-dissipation tube selection for sleeved electronic components.