A practical look at bypass gaps, compression recovery, and diffusion boundaries when conductive continuity and moisture-dust sealing share one enclosure seam.
Category Archives: Conductive Materials
Conductive Materials, Latest News
How Conductive Cloth Tape Supports an EMI Shielding Path: Absorption Loss and Grounding Design
10
Sep
Sep
Starting from grounding continuity at enclosure seams, this article explains the material mechanism of conductive cloth tape, the Schelkunoff absorption-loss formula, and key selection considerations.
Conductive Materials, Latest News
How Should an EMI Shielding Gap Be Controlled? Conductive Foam Contact Design
09
Sep
Sep
A practical engineering view of how conductive foam uses compressible conformity and distributed contact to support EMI grounding at enclosure boundaries.
Conductive Materials, Latest News
EV battery pack sealing is not just about thickness, but squeeze ratio and recovery
08
Sep
Sep
LXFP-256 Liquid Silicone Foam Elastomer is a useful case for discussing preload, squeeze ratio, and long-term recovery in EV battery pack sealing. This article uses a simple seal squeeze model to organize the key selection points for foam silicone in civilian EV pack enclosures.
Conductive Materials, Latest News
Designing an EMI-Shielding Seal: Co-extruded Conductive Silicone Gasket
07
Sep
Sep
A practical view of seams, conductive continuity and compression for EMI shielding seals.
Conductive Materials, Latest News
Low-Frequency EMI Absorbing Sheet Design: FPC Noise and Shield-Frame Resonance
01
Sep
Sep
An engineering view of C-FO-LF Low-Frequency EMI Absorbing Sheet for compact-electronics noise control, including mechanism, limits and selection checks.
Conductive Materials, Latest News
ESD Interface Control for Precision Electronics: Selecting Conductive Silicone Tube
31
Aug
Aug
A practical view of grounding paths, contact conditions and Ohm’s law for conductive silicone tube selection in precision electronics and industrial equipment.
Conductive Materials, Latest News
ESD Interface Control for Precision Fixtures: Selecting an Antistatic Silicone Pad
29
Aug
Aug
A practical view of controlled-resistance paths and contact conditions for antistatic silicone pads in precision electronics and PCB fixtures.
Conductive Materials, Latest News
Conductive Foam for EMI Shielding and Grounding: Combining Contact, Gap Filling, and Recovery
18
Aug
Aug
See how conductive fabric, resilient foam, and conductive adhesive work together to support EMI shielding, grounding, gap filling, and compression recovery.
Conductive Materials, Latest News
Protecting Sensitive Chips from Invisible Static: An Easy Guide to ESD Conductive Silicone Mats
13
Aug
Aug
In semiconductor fabs, SMT assembly lines, and electronics manufacturing, electrostatic discharge (ESD) is a silent component killer. Everyday friction from component trays, tools, or handling can easily build up thousands of volts of static charge. Standard workbench surfaces pose extreme hazards: Insulating Plastics: Hold static charges, causing sudden high-voltage sparks that fry chip micro-circuits. Pure […]