Connect ESD dissipation, flexible routing, and homogeneous-material RoHS documentation in one conductive silicone tubing decision.
Category Archives: Conductive Materials
Conductive Materials, Latest News
Soft-Conforming Antistatic Silicone Pads for Cushioning and Conductive Contact in Precision Assembly
10
Oct
Oct
A verified 30 Shore A hardness and 3.0 mm thickness make this black antistatic silicone pad suitable where conforming contact, cushioning, and a conductive path are needed together.
Conductive Materials, Latest News
How Should Conductive Cloth Tape Be Grounded? Check the Path, Bond and Test Points
06
Oct
Oct
A pre-application checklist for conductive cloth tape covering grounding-path length, effective width, bonding interfaces and continuity test points.
05
Oct
Oct
A sourcing and validation checklist for nickel-graphite co-extruded silicone gaskets used at outdoor electronics enclosure seams.
Conductive Materials, Latest News
Will Conductive Foam Recover After Compression? Five Checks Before Sampling
04
Oct
Oct
Conductive foam must fill an enclosure gap and retain predictable thickness recovery after repeated assembly. Use a five-condition checklist and a compression-set model before requesting samples.
03
Oct
Oct
Flange micro-gaps are one possible leak path for silicone foam gaskets. Using official LXFP-256 data, this checklist covers flatness, compression stress, bolt spacing, joints, recovery and water absorption.
Conductive Materials, Latest News
Ordering a Custom ESD Conductive Silicone Sheet: 5 Specs to Confirm
03
Oct
Oct
Before ordering a custom black ESD conductive silicone sheet, align the resistance method, temperature, thickness and hardness, grounding interface, dimensions, and converting details.
Conductive Materials, Latest News
Can a Low-Frequency EMI Absorbing Sheet Support SAR Optimization? Check Band, Placement, and Device Validation
02
Oct
Oct
A practical sequence for assessing an EMI absorbing sheet in SAR optimization: identify the band and coupling path, define placement and thickness, then validate the complete device.
Conductive Materials, Latest News
Conductive Silicone Tube Tensile Flexibility Guide: Volume Resistivity 2.5–6 Ω·cm, Shore A 70, and ASTM D412 Tensile Selection
01
Oct
Oct
Designed for dynamic robotic routing, Lixing Conductive Silicone Tube combines 70 Shore A hardness, tensile strength ≥ 5 MPa, and 170% elongation at break with stable 2.5 to 6 Ω·cm volume resistivity for reliable ESD grounding.
Conductive Materials, Latest News
Conductive Silicone Tube: Controlling Resistance Through Material and Geometry
21
Sep
Sep
Use R = ρL/A to connect conductive silicone material data with tube length, cross-section, contacts, and assembly verification.