Thermal Grease, Gap Pad, or Phase-Change Pad: Select by Gap and Bondline

灰色導熱膏貼合功率模組與散熱板介面的工業微距圖

When a power module, CPU, or GPU meets a heat sink across fine surface irregularities, Thermal Grease can conform as a grey, high-viscosity paste and reduce air pockets at the interface. The product page lists 2–10 W/m·K grades and a -40 to 250°C operating range. Selection still needs the real gap, application method, and comparable test conditions.

Grease conforms to fine, irregular interfaces

The practical benefit of grease is its ability to spread over microscopic surface variation. The listed applications include chips, diodes, transistors, and power modules between components and heat sinks. The product is described as non-flowing and is available in different conductivity grades and packaging options for sample evaluation.

Defined gaps and handling needs favor sheet materials

Gap pads suit assemblies that need a defined thickness, die-cut handling, and placement. Phase-change pads require their specified temperature and pressure conditions to wet the interface. Their individual data cannot be inferred from the grease’s 2–10 W/m·K range. For the shared contact problem, see the thermal interface contact guide.

Conductivity grade must be read with bondline thickness

This thermal grease is offered in 2–10 W/m·K grades, with ASTM D5470 listed on the product page. A higher k can reduce theoretical layer resistance, while actual performance remains sensitive to bondline thickness, effective area, surface roughness, and assembly pressure.

A resistance equation links thickness and conductivity

For steady one-dimensional conduction through a homogeneous plane layer, R_cond = L / (k × A). R_cond is conduction resistance in K/W, L is thickness in m, k is conductivity in W/(m·K), and A is effective area normal to heat flow in m². The MIT thermal-resistance notes present this relationship. It assumes steady one-dimensional conduction and approximately constant k. It excludes contact resistance, roughness, pump-out, dry-out, pressure, and phase-change behavior, so it is neither a product test result nor a lifetime guarantee.

Send interface conditions with the sample request

Start with grease for thin, irregular contact; compare a pad when the gap is defined and handling matters; review a phase-change material when heat-activated wetting is required. Provide mating materials, contact area, estimated gap, operating temperature, and assembly method so samples can be evaluated under matching conditions.

Match the material form to the power-module interface

The high-viscosity form and 2–10 W/m·K grade range make this grease relevant to fine contact variation in computing and power-electronics interfaces. The final decision should come from tests at the same pressure, thickness, and temperature. Contact Lixing Composite Materials Co., Ltd. for specifications or samples.

導熱硅酯(導熱膏) — video overview

LINE